It seems that recently almost every day there’s a question on stackoverflow regarding the ExpressionChangedAfterItHasBeenCheckedError error thrown by Angular. Usually these questions come up because Angular developers do not understand how change detection works and why the check that produces this error is required. Many developers even view it as a bug. But it’s certainly not. This is a a cautionary mechanism put in place to prevent inconsistencies between model data and UI so that erroneous or old data are not shown to a user on the page. This article explains the underlying causes of the error and the mechanism by which it’s detected, provides a few common pattern that may lead to the error and suggests a few possible fixes. The last chapter provides an explanation of why this check is important. It seems that the more links to the sources I put in the article the less likely people are to recommend it 😃. That’s why there will be no reference to the sources in this article. Relevant change detection operations A running Angular application is a tree of components. During change detection Angular performs checks for each component which consists of the following operations performed in the specified order: update bound properties for all child components/directives call ngOnInit, OnChanges and ngDoCheck lifecycle hooks on all child components/directives update DOM for the current component run change detection for a child component call ngAfterViewInit lifecycle hook for all child components/directives There are other operations that are performed during change detection and I’ve presented them all in the . Everything you need to know about change detection in Angular After each operation Angular remembers what values it used to perform an operation. They are stored in the oldValues property of the component view. After the checks have been done for all components Angular than starts the next but instead of performing the operations listed above it compares the current values with the ones it remembers from the previous digest cycle: digest cycle check that values passed down to the child components are the same as the values that would be used to update properties of these components now check that values used to update the DOM elements are the same as the values that would be used to update these elements now perform the same checks for all child components Please not that this additional check is only performed in the development mode. I’ll explain why in the last section of the article. Let’s see an example. Suppose you have a parent component A and a child component B. The A component has a name and text properties. In its template it uses the expression that references name property: template: '<span>{{name}}</span>' And it also has B component in its template and passes the text property to this component through input property binding: @Component({
    selector: 'a-comp',
    template: `
        <span>{{name}}</span>
        <b-comp [text]="text"></b-comp>
    `
})
export class BComponent {
    name = 'I am A component';
    text = 'A message for the child component`; So here is what happens when Angular runs change detection. It starts by checking A component. The first operation in the list is to update bindings so it evaluates text expression to A message for the child component and passes it down to the B component. It also stores this value on the view: view.oldValues[0] = 'A message for the child component'; Then it calls the lifecycle hooks mentioned in the list. Now, it performs the third operation and evaluates the expression {{name}} to the text I am A component. It updates the DOM with this value and puts the evaluated value to the oldValues: view.oldValues[1] = 'I am A component'; Then Angular performs the next operation and runs the same check for the child B component. Once the B component is checked the current digest loop is finished. If Angular is running in the development mode it then runs the second digest performing verification operations I listed above. Now imagine that somehow the property text was updated on the A component to the updated text after Angular passed the value A message for the child component to the B component and stored it. So it now runs the verification digest and the first operation is to check that the property name is not changed: AComponentView.instance.text === view.oldValues[0]; // false
'A message for the child component' === 'updated text'; // false Yet it has and so Angular throws the error ExpressionChangedAfterItHasBeenCheckedError. The same holds for the third operation. If the name property was updated after it was rendered in the DOM and stored we’ll get the same error: AComponentView.instance.name === view.oldValues[1]; // false
'I am A component' === 'updated name'; // false You probably have a question in your mind now how is it possible that these values changed. Let’s see that. Causes of values change The culprit is always the child component or a directive. Let’s have a quick simple demonstration. I will use the simplest example as possible but I will then show real-world scenarios after that. You probably know that child components and directives can inject their parent components. So let’s have our B component inject parent A component and update the bound property text. We will update the property in the ngOnInit lifecycle hook as it is triggered after the bindings have been processed which is shown here: export class BComponent {
    @Input() text;

    constructor(private parent: AppComponent) {}

    ngOnInit() {
        this.parent.text = 'updated text';
    }
} And as expected we get the error: Error: ExpressionChangedAfterItHasBeenCheckedError: Expression has changed after it was checked. Previous value: 'A message for the child component'. Current value: 'updated text'. Now, let’s do the same for the property name that is used in the template expression of the parent A component: ngOnInit() {
    this.parent.name = 'updated name';
} And now everything works OK. How come? Well if you take an attentive look at the operations order you will see that the ngOnInit lifecycle hook is triggered before the DOM update operation. That’s why there’s no error. We need a hook that is called after the DOM update operations and the ngAfterViewInit is a good candidate: export class BComponent {
    @Input() text;

    constructor(private parent: AppComponent) {}

    ngAfterViewInit() {
        this.parent.name = 'updated name';
    }
} And this time we get the expected error: AppComponent.ngfactory.js:8 ERROR Error: ExpressionChangedAfterItHasBeenCheckedError: Expression has changed after it was checked. Previous value: 'I am A component'. Current value: 'updated name'. Of course, real world examples are much more intricate and complex. The parent component properties update or operations that cause DOM rendering are usually done indirectly by using services or observables. But the root cause is always the same. Now let’s see some real-world common patterns that lead to the error. Shared service This pattern is illustrated by . The application is designed to have a service shared between a parent and a child component. A child component sets a value to the service which in turn reacts by updating the property on the parent component. I call this parent property update indirect because unlike in our example above it isn’t evident right away that a child component updates a parent component property. this plunker Synchronous event broadcasting This pattern is illustrated by . The application is designed to have a child component emitting an event and a parent component listening to this event. The event causes some of the parent properties to be updated. And these properties are used as input binding for the child component. This is also an indirect parent property update. this plunker Dynamic component instantiation This pattern is different because unlike the previous ones where input bindings were affected this pattern causes DOM update operation to throw the error. This pattern is illustrated by . The application is designed to have a parent component that dynamically adds a child component in the ngAfterViewInit. Since adding a child component requires DOM modification and ngAfterViewInit lifecycle hook is triggered after the Angular updated DOM the error is thrown. this plunker Possible fixes If you take a look at the error description the last statement says the following: Expression has changed after it was checked. Previous value:… Has it been created ? in a change detection hook Often, the fix is to use the right change detection hook to create a dynamic component. For example, the last example in the previous section with dynamic components can be fixed by moving the component creation to the ngOnInit hook. Although the documentation states the ViewChildren are available only after ngAfterViewInit, it populates the children when creating a view and so they are available earlier. If you google around you will probably find two most common fixes for this error — asynchronous property update and forcing additional change detection cycle. Although I show them here and explain why they work I don’t recommend using them but rather redesign your application. I explain why in the last chapter. Asynchronous update One thing to notice here is that both change detection and verification digests are performed synchronously. It means that if we update properties asynchronously the values will not be updated when the verification loop is running and we should get no error. Let’s test it: export class BComponent {
    name = 'I am B component';
    @Input() text;

    constructor(private parent: AppComponent) {}

    ngOnInit() {
        setTimeout(() => {
            this.parent.text = 'updated text';
        });
    }

    ngAfterViewInit() {
        setTimeout(() => {
            this.parent.name = 'updated name';
        });
    }
} Indeed, no error is thrown. The setTimeout function schedules a macrotask then will be executed in the following VM turn. It is also possible to executed the update in the current VM turn but after the current synchronous code has finished executing by using then callback of a promise: Promise.resolve(null).then(() => this.parent.name = 'updated name'); Instead of a macrotask Promise.then creates a micrtotask. The microtask queue is processed after the current synchronous code has finished executing hence the update to the property will happen after the verification step. Forcing change detection The other possible solution is to force another change detection cycle for the parent A component between the first one and the verification phase. And the best place to do it is inside the ngAfterViewInit lifecycle hook as it’s triggered when change detection for all child components have been performed and so they all had possibility to update parent components property: export class AppComponent {
    name = 'I am A component';
    text = 'A message for the child component';

    constructor(private cd: ChangeDetectorRef) {
    }

    ngAfterViewInit() {
        this.cd.detectChanges();
    } Well, no error. So it seems to be working but there is a problem with this solution. When we trigger change detection for the parent A component, Angular will run change detection for all child components as well and so there’s a possibility of parent property update anew. Why do we need verification loop Angular enforces so-called . No component lower in hierarchy is allowed to update properties of a parent component . This ensures that after the first digest loop the entire tree of components is stable. A tree is unstable if there are changes in the properties that need to be synchronized with the consumers that depend on those properties. In our case a child B component depends on the parent text property. Whenever these properties change the component tree becomes unstable until this change is delivered to the child B component. The same holds for the DOM. It is a consumer of some properties on the component and it renders them on UI. If some properties are not synchronized a user will see incorrect information on the page. unidirectional data flow from top to bottom after parent changes have been processed This data synchronization process is what happens during change detection — particularly those two operations I listed in the beginning. So what happens if you update the parent properties from the child component properties after the synchronization operation has been performed? Right, you’re left with the unstable tree and the consequences of such state is not possible to predict. And this will be very difficult to debug. Most of the times you will end up with an incorrect information shown on the page to the user. So why not run the change detection until the components tree stabilizes? The answer is simple — because it may never stabilize and run forever. If a child component updates a property on the parent component as a reaction to this property change you will get an infinite loop. Of course, as I said earlier it’s trivial to spot such a pattern with the direct update or dependency but in the real application both update and dependency are usually indirect. Interestingly, AngularJS didn’t have a so it tried to stabilize the tree. But it often resulted in the infamous 10 $digest() iterations reached. Aborting! error. Go ahead and google this error and you’ll be surprised by the amount of questions that this error produced. unidirectional data flow The last question you may have is why run this only during development mode? I guess this is because an unstable model is not as dramatic problem as a runtime error produced by the framework. After all it may stabilize in the next digest run. However, it’s better to be notified of the possible error when developing an application than debug a running application on the client side. Did you find the information in the article helpful?

Everything you need to know about the `ExpressionChangedAfterItHasBeenCheckedError` error

Too Long; Didn't Read

Company Mentioned

Coin Mentioned

Maxim Koretskyi

Share Your Thoughts

About Author

TOPICS

Languages

THIS ARTICLE WAS FEATURED IN...